PLOT REPORT
-----------

Report File    : H:\ProjPCB\ADAC\UNI-C\CONTROLLER (PCB - PLOT REPORT).txt
Report Written : Tuesday, October 25, 2011
Project Path   : H:\ProjPCB\ADAC\UNI-C\CONTROLLER.prj
Design Path    : H:\ProjPCB\ADAC\UNI-C\CONTROLLER.pcb
Design Title   : 
Created        : 19.10.2006 14:11:58
Last Saved     : 25.10.2011 12:38:12
Editing Time   : 11508 min
Units          : mm (precision 2)

DEVICE SETTINGS
---------------

---------------
Gerber Settings
---------------

    Leading zero suppression.
    G01 assumed throughout.
    Line termination <*> <CR> <LF>.
    2.3 format absolute inches.

    Format commands defined in Gerber file.
    Aperture table defined in Gerber file.
    Hardware arcs allowed.

--------------
Drill Settings
--------------

    Excellon Format 1
    Format 2.3 absolute in mm.
    No zero suppression.


PLOTS OUTPUT
------------
    Plot Job: "H:\ProjPCB\ADAC\UNI-C\CONTROLLER-gbr.EPJ"


Gerber Output
-------------

    "H:\ProjPCB\ADAC\UNI-C\CONTROLLER - Ritzen.gbr"

    Layers:
    -------
    Ritzen
    Board Outlines

    D-Code    Shape  (thou)
    -----------------------
    D10       Round 5
    D12       Round 1
    D13       Round 70
    D14       Oval 60 X 80 Rotation 90
    D15       Round 60
    D16       Round 42
    D17       Round 8
    D18       Square 60
    D19       Rectangle 60 X 60 Rotation 90
    D70       Round 125
    D71       Round 65
    D21       Round 150
    D22       Round 75
    D23       Round 85
    D24       Square 65
    D25       Square 80
    D26       Round 175
    D27       Round 51
    D28       Round 75
    D29       Square 110
    D72       Round 120
    D73       Rectangle 55 X 60 Rotation 90
    D74       Rectangle 65 X 65
    D75       Round 157
    D76       Round 118
    D107       Rectangle 25 X 80 Rotation 90
    D108       Rectangle 60 X 60
    D109       Rectangle 55 X 60
    D110       Rectangle 14 X 79
    D111       Rectangle 39 X 118 Rotation 90
    D112       Rectangle 31 X 118 Rotation 90
    D113       Rectangle 79 X 118 Rotation 90
    D114       Rectangle 59 X 118 Rotation 90
    D115       Rectangle 236 X 256 Rotation 90
    D116       Rectangle 25 X 80
    D117       Rectangle 55 X 80
    D118       Rectangle 28 X 59 Rotation 90
    D119       Rectangle 12 X 71 Rotation 90
    D120       Rectangle 10 X 59 Rotation 90
    D121       Rectangle 10 X 59
    D122       Rectangle 59 X 118
    D123       Rectangle 236 X 256
    D124       Rectangle 62 X 78


Gerber Output
-------------

    "H:\ProjPCB\ADAC\UNI-C\CONTROLLER - Top Silk.gbr"

    Layers:
    -------
    Top Silk
    Board Outlines

    D-Code    Shape  (thou)
    -----------------------
    D10       Round 5
    D12       Round 1
    D17       Round 8
    D125       Round 10
    D126       Round 8


Gerber Output
-------------

    "H:\ProjPCB\ADAC\UNI-C\CONTROLLER - Top Copper.gbr"

    Layers:
    -------
    Top Copper
    Board Outlines

    D-Code    Shape  (thou)
    -----------------------
    D10       Round 5
    D11       Round 15
    D12       Round 1
    D13       Round 70
    D14       Oval 60 X 80 Rotation 90
    D15       Round 60
    D16       Round 42
    D17       Round 8
    D18       Square 60
    D19       Rectangle 60 X 60 Rotation 90
    D70       Round 125
    D71       Round 65
    D21       Round 150
    D22       Round 75
    D23       Round 85
    D24       Square 65
    D25       Square 80
    D26       Round 175
    D27       Round 51
    D28       Round 75
    D29       Square 110
    D72       Round 120
    D73       Rectangle 55 X 60 Rotation 90
    D74       Rectangle 65 X 65
    D75       Round 157
    D76       Round 118
    D77       Round 25
    D78       Round 50
    D79       Round 12
    D80       Round 9
    D107       Rectangle 25 X 80 Rotation 90
    D108       Rectangle 60 X 60
    D109       Rectangle 55 X 60
    D110       Rectangle 14 X 79
    D111       Rectangle 39 X 118 Rotation 90
    D112       Rectangle 31 X 118 Rotation 90
    D113       Rectangle 79 X 118 Rotation 90
    D114       Rectangle 59 X 118 Rotation 90
    D115       Rectangle 236 X 256 Rotation 90
    D116       Rectangle 25 X 80
    D117       Rectangle 55 X 80
    D118       Rectangle 28 X 59 Rotation 90
    D119       Rectangle 12 X 71 Rotation 90
    D120       Rectangle 10 X 59 Rotation 90
    D121       Rectangle 10 X 59
    D122       Rectangle 59 X 118
    D123       Rectangle 236 X 256
    D124       Rectangle 62 X 78
    D127       Round 79


Gerber Output
-------------

    "H:\ProjPCB\ADAC\UNI-C\CONTROLLER - Top Copper (Resist).gbr"

    Layers:
    -------
    Top Copper
    Board Outlines

    D-Code    Shape  (thou)
    -----------------------
    D10       Round 5
    D12       Round 1
    D81       Round 80
    D82       Oval 70 X 90 Rotation 90
    D83       Round 70
    D84       Round 52
    D85       Square 70
    D86       Rectangle 70 X 70 Rotation 90
    D87       Round 135
    D88       Round 75
    D89       Rectangle 70 X 70
    D90       Round 160
    D91       Round 85
    D92       Round 95
    D93       Square 75
    D94       Square 90
    D95       Round 185
    D96       Round 61
    D97       Round 85
    D98       Square 120
    D99       Round 130
    D100       Rectangle 65 X 70 Rotation 90
    D101       Rectangle 75 X 75
    D102       Round 167
    D103       Round 128
    D128       Rectangle 35 X 90 Rotation 90
    D129       Rectangle 65 X 70
    D130       Rectangle 24 X 89
    D131       Rectangle 49 X 128 Rotation 90
    D132       Rectangle 41 X 128 Rotation 90
    D133       Rectangle 89 X 128 Rotation 90
    D136       Rectangle 69 X 128 Rotation 90
    D137       Rectangle 246 X 266 Rotation 90
    D138       Rectangle 35 X 90
    D139       Rectangle 65 X 90
    D140       Rectangle 38 X 69 Rotation 90
    D141       Rectangle 22 X 81 Rotation 90
    D142       Rectangle 20 X 69 Rotation 90
    D143       Rectangle 20 X 69
    D144       Rectangle 69 X 128
    D145       Rectangle 246 X 266
    D146       Rectangle 72 X 88


Gerber Output
-------------

    "H:\ProjPCB\ADAC\UNI-C\CONTROLLER - Top Copper (Paste).gbr"

    Layers:
    -------
    Top Copper
    Board Outlines

    D-Code    Shape  (thou)
    -----------------------
    D10       Round 5
    D12       Round 1
    D104       Rectangle 51 X 56 Rotation 90
    D105       Rectangle 61 X 61
    D134       Rectangle 51 X 56
    D135       Rectangle 58 X 74
    D147       Rectangle 21 X 76 Rotation 90
    D148       Rectangle 10 X 75
    D149       Rectangle 35 X 114 Rotation 90
    D150       Rectangle 27 X 114 Rotation 90
    D151       Rectangle 75 X 114 Rotation 90
    D152       Rectangle 55 X 114 Rotation 90
    D153       Rectangle 232 X 252 Rotation 90
    D154       Rectangle 21 X 76
    D155       Rectangle 51 X 76
    D156       Rectangle 24 X 55 Rotation 90
    D157       Rectangle 8 X 67 Rotation 90
    D158       Rectangle 6 X 55 Rotation 90
    D159       Rectangle 6 X 55
    D160       Rectangle 55 X 114
    D161       Rectangle 232 X 252


Gerber Output
-------------

    "H:\ProjPCB\ADAC\UNI-C\CONTROLLER - Bottom Copper.gbr"

    Layers:
    -------
    Bottom Copper
    Board Outlines

    D-Code    Shape  (thou)
    -----------------------
    D10       Round 5
    D11       Round 15
    D12       Round 1
    D13       Round 70
    D14       Oval 60 X 80 Rotation 90
    D15       Round 60
    D16       Round 42
    D17       Round 8
    D18       Square 60
    D19       Rectangle 60 X 60 Rotation 90
    D70       Round 125
    D71       Round 65
    D21       Round 150
    D22       Round 75
    D23       Round 85
    D24       Square 65
    D25       Square 80
    D26       Round 175
    D27       Round 51
    D28       Round 75
    D29       Square 110
    D72       Round 120
    D73       Rectangle 55 X 60 Rotation 90
    D74       Rectangle 65 X 65
    D75       Round 157
    D76       Round 118
    D77       Round 25
    D78       Round 50
    D79       Round 12
    D80       Round 9
    D108       Rectangle 60 X 60


Gerber Output
-------------

    "H:\ProjPCB\ADAC\UNI-C\CONTROLLER - Bottom Copper (Resist).gbr"

    Layers:
    -------
    Bottom Copper
    Board Outlines

    D-Code    Shape  (thou)
    -----------------------
    D10       Round 80
    D11       Oval 70 X 90 Rotation 90
    D12       Round 70
    D13       Round 52
    D14       Square 70
    D15       Rectangle 70 X 70 Rotation 90
    D16       Round 135
    D17       Round 75
    D18       Rectangle 70 X 70
    D19       Round 160
    D70       Round 85
    D71       Round 95
    D20       Square 75
    D21       Square 90
    D22       Round 185
    D23       Round 61
    D24       Round 85
    D25       Square 120
    D26       Round 130
    D27       Rectangle 65 X 70 Rotation 90
    D28       Rectangle 75 X 75
    D29       Round 167
    D72       Round 128
    D73       Round 1
    D74       Round 5


Gerber Output
-------------

    "H:\ProjPCB\ADAC\UNI-C\CONTROLLER - Bottom Copper (Paste).gbr"

    Layers:
    -------
    Bottom Copper
    Board Outlines

    D-Code    Shape  (thou)
    -----------------------
    D73       Round 1
    D74       Round 5
    D75       Rectangle 51 X 56 Rotation 90
    D76       Rectangle 61 X 61


NC Drill Output
---------------

    Output:
    -------
    Plated Round Drill Holes
    Plated Slots
    Plated Board Outlines

    "H:\ProjPCB\ADAC\UNI-C\CONTROLLER - Drill Data - Through Hole.drl"


    Tool             Size        Count  ID
    --------------------------------------
    T001        00.024 in          138   Z
    T002        00.032 in          601   C
    T003        00.035 in          210   F
    T004        00.037 in          167   D
    T005        00.040 in            4   G
    T006        00.045 in            2   AE
    T007        00.060 in            2   AY
    T008        00.060 in            3   AI
    T009        00.063 in            2   AR
    T010        00.083 in            2   AP
    T011        00.100 in            6   A
    T012        00.125 in            2   H
    T013        00.128 in            2   AQ
    --------------------------------------
    All                           1141
    --------------------------------------

NC Drill Output
---------------

    Output:
    -------
    Unplated Round Drill Holes
    Unplated Slots
    Unplated Board Outlines

    "H:\ProjPCB\ADAC\UNI-C\CONTROLLER - Drill Data - Through Hole (Unplated).drl"


    Tool             Size        Count  ID
    --------------------------------------
    T001        00.025 in            3   
    T002        00.043 in            1   AU
    T003        00.063 in            1   AX
    --------------------------------------
    All                              5
    --------------------------------------

Gerber Output
-------------

    "H:\ProjPCB\ADAC\UNI-C\CONTROLLER - Drill Ident Drawing - Through Hole.gbr"

    Layers:
    -------
    Board Outlines

    Drill Ident Drawing
    -------------------

    Drill     Plated    Size      Shape     ID        
    --------------------------------------------------
    100       Y         100       Round     A         
    32        Y         100       Round     C         
    37        Y         100       Round     D         
    35        Y         100       Round     F         
    40        Y         100       Round     G         
    125       Y         100       Round     H         
    24        Y         100       Round     Z         
    45        Y         100       Round     AE        
    60        Y         100       Round     AI        
    83        Y         100       Round     AP        
    128       Y         100       Round     AQ        
    63        Y         100       Round     AR        
    43                  100       Round     AU        
    63                  100       Round     AX        
    60        Y         100       Round     AY        
    --------------------------------------------------

    D-Code    Shape  (thou)
    -----------------------
    D73       Round 1
    D74       Round 5
    D77       Round 100


End Of Report.
